Frequency Range: 600–6000 MHz
Gain: 2±0.5 dBi
V.S.W.R: ≤2.0
Nominal Impedance: Not stated in the datasheet
Polarization: Vertical
Maximum Power: 100 W
KS600M2V70NKDX
KEESUN
KS600M2V70NKDX
| Availability: | |
|---|---|
| Quantity: | |
A drone, a mesh radio and a fixed wireless unit all need an antenna that covers a wide stretch of spectrum and survives the weather. A narrow whip only holds one band, and a plastic stick antenna breaks on the first rough landing. The demand for an omni blade antenna that runs from 600 MHz to 6 GHz has never been higher. We are proud to introduce the 600-6000MHz Ultra Wideband 2dBi UAV Omni Blade Antenna, model KS600M2V70NKDX, a white fiberglass blade with an N-K connector.
This part answers a wideband outdoor requirement. The band is 600–6000 MHz, so one part covers the 600 and 900 MHz land mobile channels, the 1.4 and 2.4 GHz datalinks, and the 5 GHz and 6 GHz WiFi ranges. Gain is 2±0.5 dBi, the horizontal pattern is 360°, and the vertical half-power beamwidth is 70±5°, which is a wide fan that suits a moving platform. Polarization is vertical, electrical downtilt is 0°, and VSWR is ≤2.0 at each radiation port. Average power handling is 100 W or more. The body is 116×80×155 mm in high quality white fiberglass, the connector is N-K, the pole range is Ø20–Ø80 mm, and the weight is 0.03 kg.
The antenna works on three points: one band from 600 MHz to 6 GHz, a 360° pattern in a flat blade, and a housing built for wind and rain.
The part covers 600–6000 MHz without a gap, so one blade serves a low band telemetry channel, a 2.4 GHz control link and a 5 GHz video link at the same time. VSWR stays at 2.0 or below at each port across the whole span, and gain is 2±0.5 dBi, which is flat rather than peaky. For a platform that has to carry one antenna instead of three, that is the point of this design.
The horizontal pattern is 360°, so the platform does not have to be aimed and the antenna works as a true omni in azimuth. The vertical half-power beamwidth is 70±5°, which is a wide fan: it covers a platform that rolls or climbs, and it keeps the link when the antenna is not perfectly upright. Electrical downtilt is 0°, so the pattern sits level with the antenna axis.
The cover is high quality white fiberglass, the waterproof grade is IP65, the limiting wind speed is 200 km/h, and the element is DC grounded. The operating range is −40 °C to +60 °C, and the limiting range is −55 °C to +75 °C. The body is 116×80×155 mm and weighs 0.03 kg, and the mounting accessory adds 0.05 kg on a pole of Ø20–Ø80 mm. A blade this light does not load a small mast, and a fiberglass cover does not crack like a plastic stick when the platform lands hard.
Wideband coverage, a 360° pattern and an IP65 fiberglass body make this omni blade antenna useful wherever a platform needs one antenna across several bands.
UAV control and telemetry: one blade covers the 600 and 900 MHz control channels and the 2.4 and 5 GHz video links, so the airframe carries one antenna.
Ground stations: the 360° pattern means the station does not have to track the drone in azimuth, and the 70° vertical beam covers a drone that climbs.
Mesh and MANET radios: a wideband omni is what a mesh node needs when the channel plan is not fixed.
Public safety and utility vehicles: 600–960 MHz land mobile channels and the higher data bands run on one part, and IP65 suits a roof mount.
Fixed wireless access: the band covers 2.4, 5 and 6 GHz, which is the range a CPE or a bridge uses.
Outdoor monitoring: the fiberglass cover, IP65 grade and 200 km/h wind rating suit a mast that faces weather all year.
The 600-6000MHz Ultra Wideband 2dBi UAV Omni Blade Antenna, KS600M2V70NKDX, does one job: it covers 600 MHz to 6 GHz on one connector with a 360° pattern. The 116×80×155 mm white fiberglass blade carries an element with 2±0.5 dBi, a 360° horizontal pattern, a 70±5° vertical beam, VSWR ≤2.0, vertical polarization and 0° downtilt, with 100 W or more of average power handling. The N-K connector, IP65 grade, 200 km/h wind limit, −40 °C to +60 °C range, 0.03 kg weight and Ø20–Ø80 mm pole range state the rest. For a drone, a mesh node or a fixed wireless unit that has to cover the whole band plan in one part, this blade antenna is the practical answer.