Where these components are used
Different industries ask different things of the same RF link. What they share is a need for an antenna and feed line that hold their performance in the field.
Vessel communication and tracking
Ships rely on antennas for voice, data and position reporting. Weatherproof omni antennas and GNSS antennas keep those links up across open water.
Offshore energy platforms
Platforms and wind farms need dependable telemetry and safety communication. Directional and omni antennas, paired with stable coaxial runs, carry data back to onshore control rooms.
Fishing fleets and small craft
Smaller vessels have less space and power. Compact, rugged antennas and RF assemblies give them a dependable way to report position and stay in contact.
Marine safety and monitoring
Buoys, beacons and unmanned surface craft collect and transmit data offshore. Low-profile antennas and sealed RF connectors keep those systems working in spray and humidity.
The problems on the ground
Most RF problems are not dramatic failures. They are small, persistent losses that get baked into a system before anyone notices.
- Corrosion and water ingress. Salt spray and humidity corrode connectors and penetrate housings, interrupting communication when the weather turns.
- Wind and mechanical stress. Antennas on masts face constant load. Structures not rated for wind fail, and mounts loosen under vibration.
- Signal loss over long runs. Feed lines on a vessel can be long. Lossy cable weakens both transmit and receive, shrinking the usable link budget.
- Mismatched RF parts. An antenna and cable from different suppliers may not match in impedance or VSWR, adding loss and reflections.
- Limited customisation. Deck layouts and mast heights differ from vessel to vessel. Standard parts rarely fit without modification.
What KEESUN delivers
We design the antenna, the cable and the connector as one matched chain, so performance survives the move from the datasheet to the installation.
Technical capabilities at a glance
| Capability | Detail |
|---|---|
| Antenna types | FRP omni, directional panel, Yagi, GNSS, MIMO, embedded PCB/FPC |
| Typical GNSS antenna | 1575.42 +/- 5 MHz, 3 dBi, IP65, 36.9 m/s wind rating (typical model) |
| Connectors | N, SMA, TNC, TNCA, 7/16, BNC and more, to 110 GHz on precision types |
| Cables | Flexible, semi-rigid, low-loss phase-stable and test cables |
| Custom service | OEM/ODM, cable length, mounting, RF simulation and test reports |
| Quality | ISO 9001:2015, ISO 14001:2015, 100% RF inspection |
Note: figures shown are typical values from Keesun product documentation and vary by model. Keesun supplies antennas and RF interconnect components; system-level positioning, communication and tracking performance depends on the complete design.
Next step. Tell us your frequency bands, cable run length and mounting conditions. We will propose an antenna and RF interconnect set with test data for your vessel or platform.
Talk to an engineer