Keesun - Shenzhen Keesun Technology Co.,Ltd.
5G Antenna Solutions Manufacturer | ODM & OEM 
  Call Us
+86-18603053622
Multi-Band 5-Port Directional Panel Antenna 1710–4200 MHz, N-Female, 13 dBi
You are here: Home » Products » Panel Directional Antenna » Plate/Panel Antenna » Multi-Band 5-Port Directional Panel Antenna 1710–4200 MHz, N-Female, 13 dBi

Multi-Band 5-Port Directional Panel Antenna 1710–4200 MHz, N-Female, 13 dBi

Product Specifications

Frequency Range: 1710–1880 MHz, 2515–2675 MHz, 3700–4200 MHz (5 ports)

Gain: 12–13.5 dBi (per port, 13 dBi nominal)

V.S.W.R: <2.0

Nominal Impedance: 50 Ohm

Polarization: Horizontal and Vertical (per port)

Maximum Power: 100 W (per port)

  • KSANT-10397-A

  • KEESUN

  • KSANT-10397-A

Availability:
Quantity:
pinterest sharing button
whatsapp sharing button
facebook sharing button
twitter sharing button
linkedin sharing button
line sharing button
kakao sharing button
sharethis sharing button

Multi-Band 5-Port Directional Panel Antenna 1710–4200 MHz, N-Female, 13 dBi, KSANT-10397-A

A site that carries 1.8 GHz, 2.6 GHz and 3.5–4.2 GHz traffic usually ends up with three panels on one pipe. Each panel adds a mount, a jumper, a wind area and a grounding point, and the tower crew pays for all of it. The demand for one radome that carries every band has never been higher. The solution lies in a multi-band panel that puts all the ports on one mechanical body. We are proud to introduce the Multi-Band 5-Port Directional Panel Antenna, model KSANT-10397-A, a 585×280×80 mm linear-polarized panel built for outdoor sectors that serve several bands at once.

This part is built around a simple idea: five ports, one radome, one mount. Port 1 and Port 2 sit on 2515–2675 MHz at 13 dBi, one horizontal and one vertical, so the pair works as a 2×2 MIMO channel. Port 3 sits on 3700–4200 MHz at 13 dBi in vertical polarization. Port 4 and Port 5 sit on 1710–1880 MHz at 12–13.5 dBi, again one horizontal and one vertical for MIMO. All five ports are 50 Ohm, match under VSWR 2.0, and take 100 W each. The radome is light gray UPVC, the element is DC grounded, wind rating is 36.9 m/s, and the operating range is −45 °C to +85 °C. One panel replaces three, and the mount is counted once.

Technical Excellence: The Core Advantage

The design holds together on three points: five ports inside one 585 mm radome, dual-polarization MIMO on the two bands that carry data, and 100 W per port behind five N-female connectors.

One Radome, Five Ports, Three Bands

The panel is 585×280×80 mm and carries 1710–1880 MHz, 2515–2675 MHz and 3700–4200 MHz in one body. That is the whole point of a multi-band panel: the tower crew installs one mount instead of three, and the wind area stays at one panel size. Because the ports share one radome, the feeder runs land at one point on the pipe, and the grounding is done once. On a crowded site, that is the difference between a clean install and a stack of brackets that has to be re-surveyed.

Dual-Polarization MIMO on 1.8 and 2.6 GHz

The 1.8 GHz and 2.6 GHz bands each get a horizontal and a vertical port. That is what MIMO needs: two branches with the same band and the same pattern, one turned 90°. Port 1 and Port 2 pair on 2515–2675 MHz at 13 dBi. Port 4 and Port 5 pair on 1710–1880 MHz at 12–13.5 dBi. The 3.7–4.2 GHz band is a single vertical port, which is enough for the 5G range where one stream is served. The horizontal beamwidth stays between 33° and 80° depending on the band, and the vertical beamwidth between 18° and 45°, so the sector shape is set by which port feeds the radio.

100 W per Port with Real Directional Isolation

Each port takes 100 W, which covers a multi-carrier radio unit on every band, and the match is VSWR <2.0 on all five. Directionality is stated per port, not as one average: the front-to-back ratio runs 22–27 dB on 2.6 GHz horizontal, 24–29 dB on 2.6 GHz vertical, 29–35 dB on 3.7–4.2 GHz, 18–24 dB on 1.8 GHz horizontal and 18–31 dB on 1.8 GHz vertical. The element is DC grounded, so static charge drains to the mount. Mechanical qualification is written out rather than assumed: a 1 m drop test, a ≥20 N pull force test, vibration from 10–55 Hz at 0.35 mm and 50.0 m/s² over 30 cycles, and 1.5 kV insulation, 1.5 kV sheath and 0.5 kV insulation-to-sheath withstand. The part is RoHS compliant.

Versatile Application Scenarios

Five ports, MIMO pairs on two bands and 13 dBi gain make this panel useful wherever one sector has to serve several bands from a single mount.

Outdoor Small Cells and Sector Sites

Multi-band small cells: 1.8, 2.6 and 3.7–4.2 GHz run on one panel, so the cabinet feeds one radome instead of three.

Macro and micro sectors: 13 dBi and a stated front-to-back ratio suit a sector on a tower, a rooftop pipe or a pole, with one tilt setting for all bands.

WISP Hubs and Point-to-Multipoint

WISP hub sectors: 1.8 and 2.6 GHz carry subscribers with MIMO, and the 3.7–4.2 GHz port handles the backhaul side.

Point-to-multipoint links: the horizontal beamwidth sets the sector width, and 100 W per port leaves room for more carriers as the site grows.

Private LTE, Utility and Campus Networks

Private LTE and 5G: ports, mining, campus and industrial sites run several bands at once, and one panel answers all of them on one mount.

Utility and public-safety sites: the light gray UPVC radome, DC grounding and −45 °C to +85 °C range suit outdoor cabinets that see no maintenance.

Conclusion: One Panel for the Whole Sector

The Multi-Band 5-Port Directional Panel Antenna, KSANT-10397-A, does one job well: it puts three bands and five ports on a single 585×280×80 mm radome. Port 1 and Port 2 pair on 2.6 GHz, Port 4 and Port 5 pair on 1.8 GHz, and Port 3 covers 3.7–4.2 GHz, all at 13 dBi nominal, VSWR <2.0, 50 Ohm and 100 W per port. The front-to-back ratio is given per port from 18 dB to 35 dB, so the isolation is known before the site survey. The DC-grounded element, 36.9 m/s wind rating, −45 °C to +85 °C range and RoHS compliance are stated without rounding up. For a sector that carries several bands, this panel is the one part that removes the stack.

Previous: 
Next: 
Shenzhen Keesun Technology Co.,Ltd was founded in Aug of 2012, a high-tech enterprise specializing in various types of antenna and network cable manufacturing.

Quick Links

Product Category

Contact Us

    +86-18603053622
    +86-13277735797
   4th Floor, Building B, Haiwei Jingsong Industrial Zone Heping Community Fuhai Street, Baoan District, Shenzhen City.
Copyright © 2023 Shenzhen Keesun Technology Co.,Ltd. Supported by Leadong.com. Sitemap